Phone

616-881-1720

Email

sales@crowlersandmore.com

Crafting and Canning Excellence: A Beginner’s Guide to Brewing and Canning Your Own Alcoholic Beverages

Open box of brite cans ready for filling

Moving from kegs or bottles to cans is a big step for a homebrewer or a new small brewery. This guide covers the basics, from brewing and conditioning to filling, seaming and labeling, plus the cans, ends and carriers you’ll need to get started.

Why Can Your Beer?

Cans block light and oxygen, chill quickly, travel well and are easy to recycle. For a small brewery they also open the door to retail, to-go sales and events. Our cans are BPA-NI lined.

Step 1: Brew and Ferment

Every beer starts with water, malt, hops and yeast. Mash your grains to make wort, boil it with hops for bitterness and aroma, then cool it and pitch yeast. Let fermentation finish completely before you package. Canning beer that is still fermenting is the most common cause of swollen cans.

Step 2: Choose How to Carbonate and Remove Oxygen

  • Force carbing: Carbonate the beer in a keg with CO2, then fill from the keg. The extra foam during filling helps push oxygen out of the can before seaming.
  • Can conditioning: Add a small, precise amount of priming sugar (and yeast if needed) just before filling. The yeast consumes the sugar and leftover oxygen and carbonates the beer naturally. Too little sugar leaves the beer flat; too much, or under-fermented beer, can cause cans to swell or burst.

Step 3: Gather Your Equipment and Supplies

Step 4: Sanitize Everything

Clean and sanitize your cans, ends, filler, seamer and every surface the beer touches. Contamination is the fastest way to ruin a good batch.

Step 5: Fill and Seam

Fill each can to a consistent level and seam it right away to keep oxygen out. Follow your seamer’s instructions and check your seams regularly. It takes some practice to find a rhythm.

Step 6: Condition and Check

If you are can conditioning, store the cans and check them over the next few weeks. Firm cans are a good sign. Cans that bulge are over-carbonated; soft cans may be under-carbonated or under-filled. Adjust your priming and fill levels for the next batch.

Step 7: Label and Share

A label turns a homebrew into a brand. Order custom labels on durable BOPP film, starting at 250 labels, with free label design, or order labeled cans ready to fill. If you plan to sell, check the requirements with the TTB and your state first.

Troubleshooting Quick Tips

  • Off flavors or staleness: Reduce oxygen pickup during transfer and filling.
  • Flat beer: Check your priming amounts and make sure the yeast is still healthy.
  • Leaking cans: Recheck your seamer adjustment and use matching ends.

Get Started with Crowlers and More

From the first test batch to a regular release, Crowlers and More has the cans, ends, labels and carriers you need. Browse our brite cans, explore custom labels or order a Sample Box to begin.